“Can’t somebody just make this go away?”
Just about every time we show up to tackle a home plumbing problem, we can practically hear our client speaking (or screaming!) those words. That’s because there are few things more frustrating around your home than faulty plumbing, especially since you rely on it pretty much 24/7.
The thing is, you don’t necessarily need our services each and every time something goes wrong. If you have a little time, patience, and the right tools, you’ll be amazed at what you can take care of on your own. So, in the interest of helping save you a little money and aggravation, here are a few handy home plumbing self-tips.
Overflowing Toilet
First step: Remove the tank lid and push down on the stopper until it connects and closes up the valve seat. Once that’s done, turn off the toilet’s water supply valve. At the very least, you’ve prevented or at least minimized any resulting water damage. Your next step, of course, is to try clearing up the clog. Vigorously pumping a plunger is one way. If that doesn’t work, try flushing a pot full of boiling water down the toilet and then plunge again. That often takes care of the problem.
Faulty Water Heater
How do you know if you’re having a problem with your water heater? Well, first there’s the obvious: no hot water or a diminished supply. There are other symptoms, including rusty- colored water and the scent of rotten eggs, among others.
Water heaters are very complex systems, so exercise extreme caution if you decide to undertake a troubleshooting venture. And if you do, follow these preliminary steps:
- Turn off the power supply at the circuit breaker. If your breakers aren’t labeled, there’s no better time to get that done than now: contact your electrician for professional assistance.
- If you have a gas water heater, turn the pilot control valve to the “pilot” setting.
- Shut off the water supply.
What you do from there depends on the type of water heater you have: gas, electric, or tankless. If you think you’re up to the challenge, check your owner’s manual for instructions. And if you can’t locate that, call the manufacturer and ask for a new copy.
Faucet won’t shut off
Over time, the rubber of composition washers will wear out from one cause or another, including the build-up of sediment and chemicals from unfiltered water. Once even the slightest crack or loosening occurs, water will start to leak. Once again, check your owner’s manual or search the internet for details of your particular brand and model. That way you’ll know what kind and size of replacement washer to purchase.
Unfortunately, even the best and most detailed plumbing DIY information won’t always do the job. But Norhio Plumbing can, no matter how severe the problem might be. So, if you’re about ready to scream from frustration, take a deep breath first then call us right away. We’ll make the problem go away, and help restore your peace of mind.
Leave a Reply to Charline Cancel reply